Click Run and your wiimote should be able to control NES Emulators! I tested it with the default settings in VirtuaNES and it worked great! Now, go to File and Open and navigate to the WiimoteScripts (included in the zip), look for NESController.pie. Now you need to install the software to actually make WiiMote usable.įor Windows, GlovePie, Extract the contents of the zip into a new folder and run GlovePIE. I used IVT BlueSolelil as shown in screenshot. If you have a compatible Bluetooth stack, it will be detected directly as a HID device and displayed in device manager. If it does this before pairing is complete, pairing will fail. If you let up, the Wiimote will time out and turn off. Keep holding down the buttons until pairing is complete. You should be able to detect a device named “ Nintendo RVL-CNT-01“. Now Turn ON Bluetooth and try to discover for devices. You may have to keep pressing these buttons until the wiimote connects with your PC. The blue lights at the bottom of the wiimote should be flashing. You do this by pressing the 1 and 2 buttons. Make sure you have Bluetooth plugged in and proper Bluetooth stack installed.įirst, you need to get your wiimote into discovery mode.
(You can buy it separately from eBay as well around $20.) Last but not the Least – Wii Remote (WiiMote).
